GOD DAMN IT - STILL ANOTHER HOUR TO GO BEFORE IT UNLOCKS ON THE PACIFIC COAST??? WHYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
-
Ever wanted an RSS feed of all your favorite gaming news sites? Go check out our new Gaming Headlines feed! Read more about it here.
Sekiro: Shadows Die Twice PC performance thread
- Thread starter GrrImAFridge
- Start date
I have the same GPU as you and all I did was set everything to max and start playing. You do you, though.
You do you, but PC should just be set it and forget it.
What type of set up could you possibly have that makes configuring this game more difficult than a PS4 Pro?
If you're using a PS4 controller with the PC that's kind of on you for using something that's not the "default" or widely supported, and you should expect to run in to issues.
The game will run infinitely better on your RTX 2070 than it will on the Pro.
it's been one hour i'm trying to get a controller to work lol
PS4/XB1 none of them is working, i have only the right stick Gyro when i launch the game, it's incredible.
PS4/XB1 none of them is working, i have only the right stick Gyro when i launch the game, it's incredible.
970
8 GB RAM
1080p
Pretty much solid 60fps at Max with 2-3 settings turned down to High. Only played for about an hour.
Also for people having PS4 controller issues, I had an issue at first where the game would not detect the controller or the right thumbstick acted like a mouse. I managed to get it working by using DS4windows and disabling controller support on steam and not using big picture mode. Edit: Also, it's wired.
8 GB RAM
1080p
Pretty much solid 60fps at Max with 2-3 settings turned down to High. Only played for about an hour.
Also for people having PS4 controller issues, I had an issue at first where the game would not detect the controller or the right thumbstick acted like a mouse. I managed to get it working by using DS4windows and disabling controller support on steam and not using big picture mode. Edit: Also, it's wired.
Last edited:
Are people with controller problems playing wired or wireless? When I tried DS3 with an Xbox One pad over bluetooth it was all fucked up. I'm using my DS4 wired for Sekiro and all I had to do was use Steam controller support and remember how to configure it to disable gyro as mouse and it was good to go.
Nah it was $450, I went ahead and got it for PC though.
Ok this one worked for me ! (DS4)
Yes for some people.
When the game unlocks for me, I will give it a test and see. I've got a 1080ti (overclocked), i7 7600k, 16 gb ram, installed on NVME drive and G-SYNC enabled.
For context, I got flawless 4k/60 on dark souls 3, so I hope to get something similar here.
GTX 980 / I5-6600K / 8gb ram - I'm only getting around 19 fps in the starting area on low settings at 1080p, are you guys setting any specific settings or is my graphics card just too shit?
Seems like the 20fps bug. Do you have a second monitor? Try unplugging it
I have noticed some hickups on cutscene camera cuts, but no perf issues during gameplay. Playing on 1070 at 1080p, everything max. There's some headroom left there, I think it was running at something like 70% gpu usage or thereabouts. 1440p would be the next step up and I imagine that 1070 might not be quite enough for solid 60 on that res.
OP
OP
This has plagued the engine since Dark Souls 1. Any conflicting devices that can be interpreted by the game as a controller causes actual controllers to not function. I had to disable XInput for my Wooting Two for my controller to work.
Download USBDeview if you want additional information on which HID and USB devices you're disabling as it's a pain if you accidentally disabled keyboard or mouse input.
Disable Steam's controller support. For whatever reason it breaks dualshock 4s.
Assuming no other apps are also using the controller input it should just be plug and play, but the default Steam config uses gyro as a mouse so you'll want to turn that off or just set it to the generic gamepad profile.
Just installed the ducking screen just flashes like mad and I had to set my PC scale from 150 percent to 100 to see it properly but doesn't stop the flashing I can't make a selection of any kind.
Ducking PC
Ducking PC
Nope, not sure how to get those or if they're even in the PC version.
I'm getting what can't be more than 10fps with graphics settings all the way on low.
Intel Core i7-8550U @ 1.80GHz
16.0 GB RAM
GEFORCE GTX 1050
So I should be getting way better, right? Any tips appreciated.
Intel Core i7-8550U @ 1.80GHz
16.0 GB RAM
GEFORCE GTX 1050
So I should be getting way better, right? Any tips appreciated.
Game is awesome and runs great. Locked 60 at High/1440p with an 8750H and 1070 Max-Q. XB1 controller works out of the box over bluetooth.
1070 can def do 1440p, at last on all "High" settings. 4K would have to be 30 fps.
It's using your integrated GPU, not the 1050. Manually force it to the discrete card in the nVidia control panel.
1070 can def do 1440p, at last on all "High" settings. 4K would have to be 30 fps.
It's using your integrated GPU, not the 1050. Manually force it to the discrete card in the nVidia control panel.
Last edited:
Laptop? Check your CPU temps while in game. Also make sure you have high performance selected in windows power settings.
Edit: it probably is using the integrated gpu
Damn it From, you're still stuck in medieval ages literally and figuratively.
Piss poor ultrawide support and a freaking fps cap.
Why would I not want to play every game like this? Ever since I went uw 16:9 feels more like 4:3
You can buy it on console and play at 30 fps instead?
That CPU is definitely bottlenecking the hell out of that card BTW, it's worse than the venerable 2500K.
OP
OP
2080Ti with everything maxed out on a 1440 monitor, constant 60fps
I'd kill for uncapped FPS, FROM ... jus' sayin'
I'd kill for uncapped FPS, FROM ... jus' sayin'
When I load Sekiro it turns my screen purple/pink. The game seems to work but even when I quit out the desktop stays purple/pink. Anyone know how to fix this?
Edit: and the resolution on the desktop was dropped to something really low to where I can't even read what's on screen.
Edit 2: Turning on stereoscopic 3D from the Nvidia control panel fixed it but as soon as I boot the game again it's purple all over again. Hopefully someone can help.
Edit 3: switching to 1080p in game fixes it too so it's just the 4K setting that turns it pink. Hopefully someone here can help.
Edit the fourth: switching from 4K to 1080p and then back to 4K also fixes it but only until I quit. If I boot the game again it's back to purple. Also 1080p just works period even after quitting and reloading. This is fucking bizarre.
Edit: and the resolution on the desktop was dropped to something really low to where I can't even read what's on screen.
Edit 2: Turning on stereoscopic 3D from the Nvidia control panel fixed it but as soon as I boot the game again it's purple all over again. Hopefully someone can help.
Edit 3: switching to 1080p in game fixes it too so it's just the 4K setting that turns it pink. Hopefully someone here can help.
Edit the fourth: switching from 4K to 1080p and then back to 4K also fixes it but only until I quit. If I boot the game again it's back to purple. Also 1080p just works period even after quitting and reloading. This is fucking bizarre.
Last edited:
It's running well so far on my 6700k and 1070, the only issue I have is that every time I start it up it seems to be kinda stuck on a black screen for around 30 seconds before showing the Activision symbol. The other FROM games I have on PC start right up without any issue like that.
So. If you have an HDR TV that you can manually enable its HDR mode and BT2020 color space, the HDR seems to look proper. As far as I can tell, the problem is that the game doesn't have the metadata tags to tell your tv to switch over to HDR mode, but is still feeding the proper color space and possibly Luminance information. You just have to enable them manually on your tv. When you manually enable them both on your TV it seems to look proper.